Evolution W – Build Update 2

In the second update on the Evolution W I’m going to discuss working on the leading edge. This section of the wing looks to be easy work but can be a little frustrating! Also, I’m going to talk a little about fixing a goof regarding the mis-glued rib and starting the sanding process. Continue reading

Evolution W – Build Update 1

Here’s the first build update on the Evolution W, the woody DLG. In this thread I show the setup of the formers, taping the wing skins, and gluing the ribs and shear webs. A lot was done for the first two days of a build! Continue reading

Sbach 342 Empennage – Build Update 2

I had hoped to get most of the empennage, the tail feathers, done by the first weekend after starting work on the Sbach 342. Well… Making Some Progress on the Sbach 342 I tried to get the horizontal lined up just right. I spent time measuring and making sure that each half out of the fuse was the same distance. To me this is “centered”. I then measured from the tips to the center of the motor box. There was about a half inch difference. After wiggling things around to correct this I thought I was good. I mixed up … Continue reading

Evolution W – The Woody DLG

I ordered a new DLG. The Evolution W! Some may call it an addiction… Others would call it a hobby! I’ve been following this thread on RCGroups about a balsa DLG. A balsa DLG?! Yes! The wings and emmpanage are completely made from balsa and ply, the pod is carbon/kevlar, and the boom is carbon. If you know anything about Discus Launch Gliders then you’ll know that most are made from composite materials. That is what drew me in on this build. I wanted to know if it was possible to build a DLG out of balsa or wood and … Continue reading

Sbach 342: Build Update 1

Hinging the Wings Previously I talked about getting a new Skyline-RC Sbach 342. The other night I started work on putting it together. There was no paper manual in the box but a CD which contained an electronic version. When I ordered the model I looked to see if I could find a copy online. I couldn’t find one so I thought that it would be a good idea for me to upload it: Skyline-RC Manual for 70 Series. Hopefully it will help others looking for the same information. Anyhow, the first thing in the manual is hinging the ailerons. The … Continue reading

The Next RC Build: Sbach 342

Recently I’ve been consumed with unpowered flight. Not too long ago a “blowout deal” arrived to my inbox from GeneralHobby.com. It was for this 70 sized (60″) Sbach 342. At the time it was $149.99 plus shipping. Having wanted a Sbach for some time and the seemingly good deal I was ready to pull the trigger. I have only heard good things about the manufacturer, Skyline-RC. They seem to work with the same models that are produced by Goldwing. A member of the club where I fly has a few of these models. He puts them through their paces and … Continue reading